Application:
Twist chiffon, nylon silk spinning, four - sided elastic, etc
MENU
Twist chiffon, nylon silk spinning, four - sided elastic, etc
Application Scope
Twist chiffon, nylon silk spinning, four - sided elastic, etc
Technical Parameters
| Nominal reed space | 150,170, 190,210, 230,280,300,320,340,360 |
| The effective width | 0-500mm (reed space ≤230cm, standard),0-700mm (reed space≥280cm, optional) |
| Opening way | crank, cam, dobby, jacquard |
| Beam diameter | Ø800mm,Ø1000mm(optional) |
| Heald Frame No. | 4、6、8、10、12、16 |
| Nozzle Quantity | single nozzle, double nozzle, three nozzle, four nozzle |
| Voltage | 380v、415v、480v |
| Beating up method | four-linkage beating-up，U type beating shaft, solid straight shaft (optional) |
| Scissors and feeler | mechanical ceramic scissors; photoelectric weft detector |
| Warranty | 1 Year |
| Lead time | 30-45 Days |
Innovation point
● Adopting integrated wall board and optimizing the frame structure, beating-up mechanism and shedding device, the loom's high speed and stability are obviously improved compared with the original machine.
● The optimized design of the weft insertion system improves the efficiency of weft insertion and is suitable for high speed weft insertion
● Adopting U type beating-up shaft with Multi reinforced support seat and centralized lubrication system, and special beating-up balance system, improve the beating-up strength and make it more wear-resistant, besides, increase the service life of loom.
● Lower the center of gravity of the loom,improving the design structure of position line and eccentric rocking shaft makes the loom operating greatly improved. Design top speed can reach 1200 RPM;
Device Configuration
| Serial No. | Name | Production Model and Use Performance Description |
| 1 | wallboard | Haijia adopts Henan Anyang casting blank (the same supplier as China Tsudakoma), imported large processing center precision processing. |
| 2 | Large box gear | Using Taiwan Datong gear, ultra-silent, ultra-wear-resistant, oil is not black, ultra-low vibration, high precision. |
| 3 | Large box bearing | Imported from Swedish SKF and FAG |
| 4 | Beating-up shaft | Ø114 * 10 Enhanced type, qualitative heat treatment, sandblasting treatment (not easy to rust, break, crack), 13 feet, Tsudakoma standard beating-up shaft. |
| 5 | Reed seat | SUS304 stainless steel reinforced, polished finish to flat level. |
| 6 | Peronium | Jinan Tianqi brand |
| 7 | Beam | Using Tsudakoma structure design, front and rear upper beam penttube, front and rear and lower beam double angle iron. |
| 8 | Suction Pipe | ∮ 76mm, 6mm thick.SUS304 stainless steel material.Reinforced suction pipe seat, stable. |
| 9 | Rear beam | stainless steel covered by chrome plated ∮ 102mm. |
| 10 | Tension free spring | ∮ 9mm or 10mm |
| 11 | Face-plate | 4008 Special type. |
| 12 | Let-off and Take-up motion | Michenical let-off and Mechanical Take-up |
| 13 | Temple poles ,guide poles | 4008 Special type, 30mm stainless steel. |
| 14 | Temple | Jilong brand , stainless steel material. |
| 15 | Leno motion | Made in Taiwan ,China, the outer ring nylon gear inner ring steel disc can play the role of shock absorption, reduce vibration during operation and improve startup efficiency, (sliding seat: stainless steel, low noise leno assembly, smooth operation, long service life). |
| 16 | Roller pressure cloth | HW-600 special new pressing device, equal tension coiling |
| 17 | Active motor | Super excited motor has the advantages of power saving, fast starting speed, small noise, less parking gear and long service life. |
| 18 | Electric control system | Domestic electric control system, good moisture-proof performance, stable operation. |
| 19 | Plunger | Ceramic plunger. |
| 20 | Pump spring | AWA pump spring. |
| 21 | Nozzle | MDH spray nozzle |
| 22 | Check valve | South Korea titanium dioxide. |
| 23 | Oil seal &nozzle | Made in Taiwan ,China |
| 24 | Scissors part | Joint bearing, scissors, scissors spring,Made in Taiwan,China, improve efficiency. |
| 25 | Suction fan | Mechanical energy saving type, install the lower and upper position |
| 26 | Regulated water tank | Double-layer filtration, bucket-type. |
| 27 | Paint | Tsudakoma yellow, professional pickling, phosphoization, electrophoresis, paint assembly line production, improve the rust effect, using Japanese Kansai paint. |
| 28 | Stainless steel screw of the Whole machine | Taiwan Dongming SUS304 stainless steel screws, no rust. |
| 29 | Waterproof device | Thicker waterproof curtain, Tsudakoma transparent waterproof cover plate |
| 30 | Weft stand | Double spray universal weft stand |
If you have any questions or needs about the product, please fill in the following form and we will contact you as soon as possible.
