News and Events

Resolution for take-up part problemsProblems that may occur in the take-up part1.The take-up chain is broken. Solution:A. Adjust the pressure of 24CA-71 chain and tension link;B.Check if the 24CA-27Y auto-rotating wheel is normal or reverse;2. The stripper off. Solution to the problem: ensure that t

Trouble resolution of beating up shaft part and let-off part1. Beating up shaft partIt's easy to accumulate waste yarn at the waterproof shield od the swing shaft, causing damage to the bearing, which results in poor beating with abnormal noises and the machine stops cloth defects. Please refer to t

Troubleshooting and solution of opening device and weft insertion part Opening device:The cleaning cycle of the loom in use is 20-25 days each time, and the lithium grease filling cycle is 20-25 days each time, and ensure that the old oil can be extruded.the problem that often occurs in the opening

Water jet looms have revolutionized the textile industry, particularly in the weaving of green polyester peach skin fabric. This article will explore the role of water jet looms in this sustainable weaving process and highlight the various benefits they offer.One of the key advantages of using water