Resolution for take-up part problemsProblems that may occur in the take-up part1.The take-up chain is broken. Solution:A. Adjust the pressure of 24CA-71 chain and tension link;B.Check if the 24CA-27Y auto-rotating wheel is normal or reverse;2. The stripper off. Solution to the problem: ensure that t

How to operate a air jet loom better and maintain the electric equipments of air jet loom1-How to operate air jet loom better? ① The original yarn is dry, the yarn defects are as few as possible, the original yarn strength is good, the strength is uneven is low, and the weak ring is less;② Electroni

How to adjust heald frames and nozzles on air jet weaving machines1-What is the effect of heald frame height on weaving?① When it is too high, it will cause weft beating at the upper part of the air-guiding part of the reed or even at the upper jaw, resulting in cracks and holes in the fabric;② When

The weft draw-in process needs to be adjusted according to the fabric's reed width, weft type, thread density and other factors, in order to achieve the purpose of smooth weft draw-in and normal weaving, and the adjustment of weft draw-in process parameters includes the adjustment of water pumps, nozzles and grippers.