How to fix the control system of shuttleless loom1. The electric control cabinet is damp and the circuit board is scorched.The electric control cabinet is damp and the circuit board is scorched.Solution: The electric control cabinet regularly replaces the full amount of the desiccant, avoids long-te

Resolution for take-up part problemsProblems that may occur in the take-up part1.The take-up chain is broken. Solution:A. Adjust the pressure of 24CA-71 chain and tension link;B.Check if the 24CA-27Y auto-rotating wheel is normal or reverse;2. The stripper off. Solution to the problem: ensure that t

How to operate a air jet loom better and maintain the electric equipments of air jet loom1-How to operate air jet loom better? ① The original yarn is dry, the yarn defects are as few as possible, the original yarn strength is good, the strength is uneven is low, and the weak ring is less;② Electroni

The weft draw-in process needs to be adjusted according to the fabric's reed width, weft type, thread density and other factors, in order to achieve the purpose of smooth weft draw-in and normal weaving, and the adjustment of weft draw-in process parameters includes the adjustment of water pumps, nozzles and grippers.