How to fix the control system of shuttleless loom

How to fix the control system of shuttleless loom

1. The electric control cabinet is damp and the circuit board is scorched.

The electric control cabinet is damp and the circuit board is scorched.

Solution: The electric control cabinet regularly replaces the full amount of the desiccant, avoids long-term power failure, pays attention to shielding when cleaning the machine, and avoids plugging and plugging with electricity. If you need to operate the machine, you need to do it after 2 minutes of power off;

2. The cable is broken and the communication is faulty.

Solution: The fixed position of the cable should be reasonable, and the plug terminal of the communication line should be firmly fixed.

3. The motor and mechanical suction fan have problems. Solution:

A. Repair the tightness of the belt;

B. 1 year/ time overhaul and maintenance of the rotor bearings;

C. The impeller of the water suction fan is ensured to be cleaned once a month, to ensure that the bearings of the impeller shaft are not overloaded.

D. Check whether there is any abnormal noise in the area of the machine for 1 day/ time tour, whether there are screws dropped, whether there is burnt smell, and whether there is any abnormal water leakage around the machine.