How to fix the control system of shuttleless loom1. The electric control cabinet is damp and the circuit board is scorched.The electric control cabinet is damp and the circuit board is scorched.Solution: The electric control cabinet regularly replaces the full amount of the desiccant, avoids long-te

Resolution for take-up part problemsProblems that may occur in the take-up part1.The take-up chain is broken. Solution:A. Adjust the pressure of 24CA-71 chain and tension link;B.Check if the 24CA-27Y auto-rotating wheel is normal or reverse;2. The stripper off. Solution to the problem: ensure that t

The weft draw-in process needs to be adjusted according to the fabric's reed width, weft type, thread density and other factors, in order to achieve the purpose of smooth weft draw-in and normal weaving, and the adjustment of weft draw-in process parameters includes the adjustment of water pumps, nozzles and grippers.

Water jet loom pening process parameter adjustment1-What effect does the size of the opening have on the weaving?① A large amount of openings can cause warp yarns to be subjected to high tension in the heald area, which can easily cause warp yarn breakage;②Increase the opening volume can reduce the