Availability: | |
---|---|
Quantity: | |
The enhanced design of the weft beating mechanism and opening device, incorporating the newly developed "U" type short pitch nozzle, significantly enhances weft drawing performance, particularly at ultra-high speeds.
An upgraded robust frame structure and improved warp feeding device reduce the fabric surface path pre-weaving, notably enhancing weft beating, especially in the six-link beating, achieving superior speed and quality.
The adaptable axial clearance in the warp feeding worm gear ensures warp feeding device stability, accommodating a wide range of fabrics - from very fine to coarse yarns, narrow to wide widths, and general to double fabrics.
Utilizing a U-shaped weft beating shaft and specialized balance system with reinforced supports and centralized lubrication system strengthens weft beating force, reduces shaft wear, and prolongs the weaving machine's lifespan.
A redesigned frame structure, with a tilted warp path from the weaving mouth, shortens the weaving surface path, enabling stable weaving even at higher densities, reducing the warp position line to 900 mm. This aligns with ergonomic operation theory, significantly enhancing weft beating performance and weaver control. Simple parameter adjustments enable speed changes in the weaving machine, allowing flexibility in weft density and speed for intricate fabrics.
The maximum design speed can reach 1400 RPM. Employing double pumps and four nozzles notably enhances work efficiency.
Water Jet Loom Configuration Table | |||
Model | HW3851、HW3873、HW600、HW6010、HW6012、HW8010、HW8030 | ||
reed width | Nominal reed width(cm) | 150、170、190、210、230、270、280、290、300、320、340、360 | |
Effective reed | Nominal reed width:0~65cm(≤230cm);0~85cm(>230cm) | ||
Weft selection | 1color、2 colors、3 colors、4 colors | ||
power | Starting mode | Direct drive motor | super start motor drive |
Motor capacity | 2.2KW、2.7KW、3.0KW、3.7KW、4.5KW、6.0KW | ||
running operation | One-hand operation button | Two-hand operation button | |
Weft insertion | pump | single pump | double pump |
nozzle | Normal nozzle,'U'nozzle | ||
Length measurement and weft storage | (FDP)Electronic Length Measurement (FDP) | (RDP)Mechanical length measurement | |
shedding | Crank shedding: 4-piece type, 6-piece type | 8-piece type | |
Positive cam shedding: 6, 8, 10 piece type | 12,14 piece type | ||
Active dobby: 16 piece type | |||
let off | negative loose warp | Positive loose warp device | |
Left and right double bearing, 2-roll mode | |||
Maximum tension | 500Kg、1000Kg | ||
diameter of the beam flange | ∮800mm | ∮914mm、∮1000mm | |
take up | Roll cloth diameter | maximum is 520MM | |
cloth roll path | S type, L type | ||
Beating-up | Crank multi reed sley beating up mechanism, "U" shaped beating up shaft | Solid straight shaft beating up | |
4 linkage,6 linkage | |||
Weft stand | Floor fixed type 2 barrels/color | ||
Selvage | Mechanical planetary mode | ||
Yarn end treatment | Spindle false twisting method | ||
Weft cutting | Mechanical scissors for weft cutting | ||
dehydration | Suction mode of micro slit tube (electric water suction motor), buoyancy air-water separator | Water absorbing strip | |
electronic | Optical fiber type feeler | Photoelectric type | |
Touch screen, control preparation, start, stop, inching and reverse inching | |||
It can display output, speed, efficiency, shutdown times, etc | |||
The four-color indicator light indicates the reason for stopping | |||
Variable inverter/variable speed device | |||
Automation and labor saving | Automatic water replenishment valve, automatic centralized refueling | Variable frequency speed regulation |
The enhanced design of the weft beating mechanism and opening device, incorporating the newly developed "U" type short pitch nozzle, significantly enhances weft drawing performance, particularly at ultra-high speeds.
An upgraded robust frame structure and improved warp feeding device reduce the fabric surface path pre-weaving, notably enhancing weft beating, especially in the six-link beating, achieving superior speed and quality.
The adaptable axial clearance in the warp feeding worm gear ensures warp feeding device stability, accommodating a wide range of fabrics - from very fine to coarse yarns, narrow to wide widths, and general to double fabrics.
Utilizing a U-shaped weft beating shaft and specialized balance system with reinforced supports and centralized lubrication system strengthens weft beating force, reduces shaft wear, and prolongs the weaving machine's lifespan.
A redesigned frame structure, with a tilted warp path from the weaving mouth, shortens the weaving surface path, enabling stable weaving even at higher densities, reducing the warp position line to 900 mm. This aligns with ergonomic operation theory, significantly enhancing weft beating performance and weaver control. Simple parameter adjustments enable speed changes in the weaving machine, allowing flexibility in weft density and speed for intricate fabrics.
The maximum design speed can reach 1400 RPM. Employing double pumps and four nozzles notably enhances work efficiency.
Water Jet Loom Configuration Table | |||
Model | HW3851、HW3873、HW600、HW6010、HW6012、HW8010、HW8030 | ||
reed width | Nominal reed width(cm) | 150、170、190、210、230、270、280、290、300、320、340、360 | |
Effective reed | Nominal reed width:0~65cm(≤230cm);0~85cm(>230cm) | ||
Weft selection | 1color、2 colors、3 colors、4 colors | ||
power | Starting mode | Direct drive motor | super start motor drive |
Motor capacity | 2.2KW、2.7KW、3.0KW、3.7KW、4.5KW、6.0KW | ||
running operation | One-hand operation button | Two-hand operation button | |
Weft insertion | pump | single pump | double pump |
nozzle | Normal nozzle,'U'nozzle | ||
Length measurement and weft storage | (FDP)Electronic Length Measurement (FDP) | (RDP)Mechanical length measurement | |
shedding | Crank shedding: 4-piece type, 6-piece type | 8-piece type | |
Positive cam shedding: 6, 8, 10 piece type | 12,14 piece type | ||
Active dobby: 16 piece type | |||
let off | negative loose warp | Positive loose warp device | |
Left and right double bearing, 2-roll mode | |||
Maximum tension | 500Kg、1000Kg | ||
diameter of the beam flange | ∮800mm | ∮914mm、∮1000mm | |
take up | Roll cloth diameter | maximum is 520MM | |
cloth roll path | S type, L type | ||
Beating-up | Crank multi reed sley beating up mechanism, "U" shaped beating up shaft | Solid straight shaft beating up | |
4 linkage,6 linkage | |||
Weft stand | Floor fixed type 2 barrels/color | ||
Selvage | Mechanical planetary mode | ||
Yarn end treatment | Spindle false twisting method | ||
Weft cutting | Mechanical scissors for weft cutting | ||
dehydration | Suction mode of micro slit tube (electric water suction motor), buoyancy air-water separator | Water absorbing strip | |
electronic | Optical fiber type feeler | Photoelectric type | |
Touch screen, control preparation, start, stop, inching and reverse inching | |||
It can display output, speed, efficiency, shutdown times, etc | |||
The four-color indicator light indicates the reason for stopping | |||
Variable inverter/variable speed device | |||
Automation and labor saving | Automatic water replenishment valve, automatic centralized refueling | Variable frequency speed regulation |