Tel: +86-532-83130887 Email: eiffel@qdhaijia.net
| Quantity: | |
|---|---|
HJ-C10
Century Haijia
Positive conjugate cam shedding device, which is now widely used in water jet loom, air jet loom, rapier loom and other loom , can weave plain weave, twill weave, satin weave and other fabrics within twelve cycles.And till now it can help weave more than 150 varieties of fabrics. The shedding stop angle can be designed according to the weaving requirements of different looms. Compared with the crank shedding and the dobby shedding,it is more suitable for wide, heavy and high-speed weaving occasions, and has the characteristics of stability, high efficiency and energy saving.
We use the latest Japanese equipment for processing. Compared with other brand, the machining precision of our parts used on the cam shedding device is more accurate.
We have optimized and improved the structural which defects of their broken screws
For the channel steel, Niupai Brand uses hot-rolled plates, which are then acid pickled and powder-sprayed. And we use acid pickling board, which cost is ¥ 1,400 more expensive per ton than them , and then we electrophoresis and powder spray it to ensure it is not rusty.
The work blanks and other parts of our cam box are all casted by the casting line, which is using in the automobile manufacture industry, and their precision, appearance and cost are different from other products
Haijia cam parts are eIectrophoretic,cam box, lifting knife,cam sheet ,channel steel and so on ,these parts will not rust.
Positive conjugate cam shedding device, which is now widely used in water jet loom, air jet loom, rapier loom and other loom , can weave plain weave, twill weave, satin weave and other fabrics within twelve cycles.And till now it can help weave more than 150 varieties of fabrics. The shedding stop angle can be designed according to the weaving requirements of different looms. Compared with the crank shedding and the dobby shedding,it is more suitable for wide, heavy and high-speed weaving occasions, and has the characteristics of stability, high efficiency and energy saving.
We use the latest Japanese equipment for processing. Compared with other brand, the machining precision of our parts used on the cam shedding device is more accurate.
We have optimized and improved the structural which defects of their broken screws
For the channel steel, Niupai Brand uses hot-rolled plates, which are then acid pickled and powder-sprayed. And we use acid pickling board, which cost is ¥ 1,400 more expensive per ton than them , and then we electrophoresis and powder spray it to ensure it is not rusty.
The work blanks and other parts of our cam box are all casted by the casting line, which is using in the automobile manufacture industry, and their precision, appearance and cost are different from other products
Haijia cam parts are eIectrophoretic,cam box, lifting knife,cam sheet ,channel steel and so on ,these parts will not rust.
