Tel: +86-532-83130887 Email: eiffel@qdhaijia.net
| Quantity: | |
|---|---|
HA-N air jet loom
Haijia
Applicable yarn type and thickness:
staple fiber 100~5S/1 (imperial cotton count) (Nm170-8.5); filament 50-900D (denier) (55.6~1000dtex)
Applicable fabric types:
base cloth, cold cloth, gauze, core cloth, fine flat cloth, labor cloth, down quilt top, cotton flannel, corduroy, wada tweed, rainproof canvas, coat fabric, poplin, striped color cloth, Oxford cloth, gingham twill cotton fabric, pile fabric, bed sheet cloth, thin fabric, thin outerwear fabric, pure wool fabric, facecloth, cotton and linen blended shirt fabric, towel, linen base cloth, lining fabric, women's clothing fabric, curtain fabric, sportswear fabric, shirting fabric, uniform fabric.
Specification
Item | Specification | Optional |
reed width | Nominal reed width(cm)：170、190、210、230、260、280、300、340、360、380cm | |
Effective reed：(170~260cm) 0~60cm from 170 to 260cm Nominal reed width reduce 0~60cm 0~80cm（280cm） 0~80cm width more than 280cm, Nominal reed width reduce 0~80cm | ||
Weaving range | spun：Ne100~Ne2.5 | |
filament：22dtex~1350dtex | ||
Weft selection | Two color, four color, six color and continuous expansion function | |
power | Positioning and stopping by electromagnetic brake control | |
super start motor drive 2.2KW（crank shedding）、3.0KW（cam shedding）、3.7KW（dobby shedding ）、6.5KW（acquard shedding） | Direct drive motor | |
Two hand operation of control buttons | ||
Weft insertion | Maximum weft insertion rate: 2300m/min | |
Combination of main nozzle and auxiliary nozzle | Drafting nozzle | |
Profiled reed | ||
Auxiliary main nozzle | ||
shedding | Crank connecting rod shedding: 4 pcs heald frame or 6 pcs heald frame | |
Positive cam shedding：Up to 10 pcs heald frame | ||
Dobby shedding: up to 16pcs heald frames | ||
jacquard shedding | ||
let off | negative loose warp or Positive loose warp device | |
electronic let off | double warp beam | |
diameter of the beam flange:Φ800mm | Φ914mm Φ1000mm | |
take up | electronic take up | |
Standard density 25-300 picks/inch | ||
Maximum roll cloth diameter: Φ 600mm (cam, dobby, jacquard shedding) Φ 520mm (crank shedding) | ||
beating up | "U" shaped beating up shaft | |
Four-link beating-up (narrow width), six-link beating-up (wide width) | ||
configure rocker shaft middle support | ||
Length measurement and weft storage | Electronic weft feeder | |
weft stand | Floor type 4 barrels (2 nozzles), Floor type 8 barrels (4 nozzles), Floor type 10 barrels (6 nozzle) | |
Selvage | Planetary gear type Selvage device | |
Yarn end treatment | Discarded take-up 2pcs drum-type | |
Weft cutting | Mechanical weft cutting device | electronic weft cutting device |
lubrication | Main transmission part oil bath type, manual centralized oil supply | Electric central oil supply |
stop machine device | Weft yarn: photoelectric weft feeler, double probe | |
Warp yarn: Electrical contact six-row dropper | ||
Others: selvage yarn, discarded edge yarn and automatic stop when the yarn is broken | ||
stop reason: show the information on the display, multi-function 4-color light stop display | ||
automation | inverter to adjust speed. | |
Memory card function | ||
Item | Specification | Optional |
reed width | Nominal reed width(cm)：170、190、210、230、260、280、300、340、360、380cm | |
Effective reed：(170~260cm) 0~60cm from 170 to 260cm Nominal reed width reduce 0~60cm 0~80cm（280cm）以上 0~80cm width more than 280cm, Nominal reed width reduce 0~80cm | ||
Weaving range | spun：Ne100~Ne2.5 | |
filament：22dtex~1350dtex | ||
Weft selection | Two color, four color, six color and continuous expansion function | |
power | Positioning and stopping by electromagnetic brake control | |
super start motor drive 2.2KW（crank shedding）、3.0KW（cam shedding）、3.7KW（dobby shedding ）、6.5KW（acquard shedding） | Direct drive motor | |
Two hand operation of control buttons | ||
Weft insertion | Maximum weft insertion rate: 2300m/min | |
Combination of main nozzle and auxiliary nozzle | Drafting nozzle | |
Profiled reed | ||
Auxiliary main nozzle | ||
shedding | Crank connecting rod shedding: 4 pcs heald frame or 6 pcs heald frame | |
Positive cam shedding：Up to 10 pcs heald frame | ||
Dobby shedding: up to 16pcs heald frames | ||
jacquard shedding | ||
let off | negative loose warp or Positive loose warp device | |
electronic let off | double warp beam | |
diameter of the beam flange:Φ800mm | Φ914mm Φ1000mm | |
take up | electronic take up | |
Standard density 25-300 picks/inch | ||
Maximum roll cloth diameter: Φ 600mm (cam, dobby, jacquard shedding) Φ 520mm (crank shedding) | ||
beating up | "U" shaped beating up shaft | |
Four-link beating-up (narrow width), six-link beating-up (wide width) | ||
configure rocker shaft middle support | ||
Length measurement and weft storage | Electronic weft feeder | |
weft stand | Floor type 4 barrels (2 nozzles), Floor type 8 barrels (4 nozzles), Floor type 10 barrels (6 nozzle) | |
Selvage | Planetary gear type Selvage device | |
Yarn end treatment | Discarded take-up 2pcs drum-type | |
Weft cutting | Mechanical weft cutting device | electronic weft cutting device |
lubrication | Main transmission part oil bath type, manual centralized oil supply | Electric central oil supply |
stop machine device | Weft yarn: photoelectric weft feeler, double probe | |
Warp yarn: Electrical contact six-row dropper | ||
Others: selvage yarn, discarded edge yarn and automatic stop when the yarn is broken | ||
stop reason: show the information on the display, multi-function 4-color light stop display | ||
automation | inverter to adjust speed. | |
Memory card function |
Applicable yarn type and thickness:
staple fiber 100~5S/1 (imperial cotton count) (Nm170-8.5); filament 50-900D (denier) (55.6~1000dtex)
Applicable fabric types:
base cloth, cold cloth, gauze, core cloth, fine flat cloth, labor cloth, down quilt top, cotton flannel, corduroy, wada tweed, rainproof canvas, coat fabric, poplin, striped color cloth, Oxford cloth, gingham twill cotton fabric, pile fabric, bed sheet cloth, thin fabric, thin outerwear fabric, pure wool fabric, facecloth, cotton and linen blended shirt fabric, towel, linen base cloth, lining fabric, women's clothing fabric, curtain fabric, sportswear fabric, shirting fabric, uniform fabric.
Specification
Item | Specification | Optional |
reed width | Nominal reed width(cm)：170、190、210、230、260、280、300、340、360、380cm | |
Effective reed：(170~260cm) 0~60cm from 170 to 260cm Nominal reed width reduce 0~60cm 0~80cm（280cm） 0~80cm width more than 280cm, Nominal reed width reduce 0~80cm | ||
Weaving range | spun：Ne100~Ne2.5 | |
filament：22dtex~1350dtex | ||
Weft selection | Two color, four color, six color and continuous expansion function | |
power | Positioning and stopping by electromagnetic brake control | |
super start motor drive 2.2KW（crank shedding）、3.0KW（cam shedding）、3.7KW（dobby shedding ）、6.5KW（acquard shedding） | Direct drive motor | |
Two hand operation of control buttons | ||
Weft insertion | Maximum weft insertion rate: 2300m/min | |
Combination of main nozzle and auxiliary nozzle | Drafting nozzle | |
Profiled reed | ||
Auxiliary main nozzle | ||
shedding | Crank connecting rod shedding: 4 pcs heald frame or 6 pcs heald frame | |
Positive cam shedding：Up to 10 pcs heald frame | ||
Dobby shedding: up to 16pcs heald frames | ||
jacquard shedding | ||
let off | negative loose warp or Positive loose warp device | |
electronic let off | double warp beam | |
diameter of the beam flange:Φ800mm | Φ914mm Φ1000mm | |
take up | electronic take up | |
Standard density 25-300 picks/inch | ||
Maximum roll cloth diameter: Φ 600mm (cam, dobby, jacquard shedding) Φ 520mm (crank shedding) | ||
beating up | "U" shaped beating up shaft | |
Four-link beating-up (narrow width), six-link beating-up (wide width) | ||
configure rocker shaft middle support | ||
Length measurement and weft storage | Electronic weft feeder | |
weft stand | Floor type 4 barrels (2 nozzles), Floor type 8 barrels (4 nozzles), Floor type 10 barrels (6 nozzle) | |
Selvage | Planetary gear type Selvage device | |
Yarn end treatment | Discarded take-up 2pcs drum-type | |
Weft cutting | Mechanical weft cutting device | electronic weft cutting device |
lubrication | Main transmission part oil bath type, manual centralized oil supply | Electric central oil supply |
stop machine device | Weft yarn: photoelectric weft feeler, double probe | |
Warp yarn: Electrical contact six-row dropper | ||
Others: selvage yarn, discarded edge yarn and automatic stop when the yarn is broken | ||
stop reason: show the information on the display, multi-function 4-color light stop display | ||
automation | inverter to adjust speed. | |
Memory card function | ||
Item | Specification | Optional |
reed width | Nominal reed width(cm)：170、190、210、230、260、280、300、340、360、380cm | |
Effective reed：(170~260cm) 0~60cm from 170 to 260cm Nominal reed width reduce 0~60cm 0~80cm（280cm）以上 0~80cm width more than 280cm, Nominal reed width reduce 0~80cm | ||
Weaving range | spun：Ne100~Ne2.5 | |
filament：22dtex~1350dtex | ||
Weft selection | Two color, four color, six color and continuous expansion function | |
power | Positioning and stopping by electromagnetic brake control | |
super start motor drive 2.2KW（crank shedding）、3.0KW（cam shedding）、3.7KW（dobby shedding ）、6.5KW（acquard shedding） | Direct drive motor | |
Two hand operation of control buttons | ||
Weft insertion | Maximum weft insertion rate: 2300m/min | |
Combination of main nozzle and auxiliary nozzle | Drafting nozzle | |
Profiled reed | ||
Auxiliary main nozzle | ||
shedding | Crank connecting rod shedding: 4 pcs heald frame or 6 pcs heald frame | |
Positive cam shedding：Up to 10 pcs heald frame | ||
Dobby shedding: up to 16pcs heald frames | ||
jacquard shedding | ||
let off | negative loose warp or Positive loose warp device | |
electronic let off | double warp beam | |
diameter of the beam flange:Φ800mm | Φ914mm Φ1000mm | |
take up | electronic take up | |
Standard density 25-300 picks/inch | ||
Maximum roll cloth diameter: Φ 600mm (cam, dobby, jacquard shedding) Φ 520mm (crank shedding) | ||
beating up | "U" shaped beating up shaft | |
Four-link beating-up (narrow width), six-link beating-up (wide width) | ||
configure rocker shaft middle support | ||
Length measurement and weft storage | Electronic weft feeder | |
weft stand | Floor type 4 barrels (2 nozzles), Floor type 8 barrels (4 nozzles), Floor type 10 barrels (6 nozzle) | |
Selvage | Planetary gear type Selvage device | |
Yarn end treatment | Discarded take-up 2pcs drum-type | |
Weft cutting | Mechanical weft cutting device | electronic weft cutting device |
lubrication | Main transmission part oil bath type, manual centralized oil supply | Electric central oil supply |
stop machine device | Weft yarn: photoelectric weft feeler, double probe | |
Warp yarn: Electrical contact six-row dropper | ||
Others: selvage yarn, discarded edge yarn and automatic stop when the yarn is broken | ||
stop reason: show the information on the display, multi-function 4-color light stop display | ||
automation | inverter to adjust speed. | |
Memory card function |
