Tel: +86-532-83130887      Email:
Home » Products » Water Jet Loom » HW-600 Series » HW-6010 Series Water Jet Shuttle Less Loom


HW-6010 Series Water Jet Shuttle Less Loom

HW-6010 inherits the advantages of HW-4008 machine, with a design speed of 1200r/min, the wall panel is changed from split to one-piece, the beam is reinforced and designed to lower the center of gravity of the beat-up, the mechanism layout is optimized, and the weft insertion curve is optimized for better adaptability. Weaving from narrow width to wide width, from general fabrics to double-layer and other special specifications fabrics, and facilitates production, processing and installation, and the installation accuracy of the machine is better guaranteed.
  • HW-6010

  • Haijia

The design of the frame structure, weft beating mechanism and opening device are optimized by using the integrated wall plate, and the high speed and stability of the loom are significantly improved compared with the original model.

The optimized design of weft guiding system improves the efficiency of weft guiding and adapts to high speed weft guiding.

The "U" type weft beating shaft and the special weft beating balance system are adopted, and the weft beating shaft adopts multiple reinforced support seats and centralized lubrication system to increase the weft beating force, improve the wear of the weft beating shaft and increase the service life of the loom.

Lowering the center of gravity of the loom, improving the design structure of warp position line and eccentric rocking shaft, greatly improving the operability of the loom, and the designed maximum speed can reach 1200RPM.

The combination of an electronic let-off gear box and an electronic take-up gear box ensures seamless tension operation. By enhancing the robustness and fluidity of guide components like the suction pipe holder, the gap between the worn-out point and the heated frame is reduced,while also attaining adequate weft insertion space in compact apertures. The gentle operation of the warp yarns is enhanced by its conducive nature,ensuring the fabric's quality.

Water Jet Loom Configuration Table



reed width

Nominal reed width(cm)


Effective reed

Nominal reed width:0~65cm(≤230cm);0~85cm(>230cm)

Weft selection

1color、2 colors、3 colors、4 colors


Starting mode

Direct drive motor

super start motor drive

Motor capacity


running operation

One-hand operation button

Two-hand operation button

Weft insertion


single pump

double pump


Normal nozzle,'U'nozzle

Length measurement and weft storage

(FDP)Electronic Length Measurement (FDP)

(RDP)Mechanical length measurement


Crank  shedding: 4-piece type, 6-piece type

8-piece type

Positive cam shedding: 6, 8, 10 piece type

12,14 piece type

Active dobby: 16 piece type

let off

negative loose warp

Positive loose warp device

Left and right double bearing, 2-roll mode

Maximum tension


diameter of the beam flange



take up

Roll cloth diameter

maximum is 520MM

cloth roll path

S type, L type


Crank multi reed sley beating up mechanism, "U" shaped beating up shaft

Solid straight shaft beating up

4 linkage,6 linkage

Weft stand

Floor fixed type

2 barrels/color


Mechanical planetary mode

Yarn end treatment

Spindle false twisting method

Weft cutting

Mechanical scissors for weft cutting


Suction mode of micro slit tube (electric water suction motor), buoyancy air-water separator

Water absorbing strip


Optical fiber type


Photoelectric type

Touch screen, control preparation, start, stop, inching and reverse inching

It can display output, speed, efficiency, shutdown times, etc

The four-color indicator light indicates the reason for stopping

Variable inverter/variable speed device

Automation and labor saving

Automatic water replenishment valve, automatic centralized refueling

Variable frequency speed regulation


Product Category

Related Products

Contact Us
Leave a Message
Contact Us
Make weaving easier, Make life better




 Qingdao Address:NO.1219 Jiaozhou Bay West Road, Huangdao District, Qingdao China
Vietnam Branch Address:161, đường Lê Lợi, Khu phở 3, Phường Hòa Phú, Thành phố Thú Dầu Một, Tinh Bình Dường, Việt Nam
Turkey Branch Address:Mineralicavus Mah. Çelik Cad. POZITIF PLAZA No:17C NILUFER BURSA
India Branch Address:A1055/56,Ragukul Textile Market ,Ring Road ,Surat,Gujrat ,India
Copyright © 2023 Qingdao Haijia Machinery Co., Ltd. All Rights Reserved. | Sitemap | Privacy Policy | Support By Leadong