Tel: +86-532-83130887 Email: eiffel@qdhaijia.net
| Quantity: | |
|---|---|
HW-6010
Haijia
84463040
Strong frame
HW-6010 inherits the advantages of HW-4008 machine, with a design speed of 1200r/min, the wall panel is changed from split to one-piece, the beam is reinforced and designed to lower the center of gravity of the beat-up, the mechanism layout is optimized, and the weft insertion curve is optimized for better adaptability. Weaving from narrow width to wide width, from general fabrics to double-layer and other special specifications fabrics, and facilitates production, processing and installation, and the installation accuracy of the machine is better guaranteed.
Opening stability
It is matched with electronic let-off gear box and electronic take-up gear box to achieve smooth tension operation. By strengthening the strength and smoothness of guide components such as the suction pipe holder, the distance from the beat-up point to the heald frame is shortened, and sufficient weft insertion space is achieved in small openings. It is conducive to the gentle operation of the warp yarns and the quality of the fabric is guaranteed.
Excellent energy saving
For different fabric types, match the appropriate weft insertion configuration and use nozzles with short spacing and high jet water concentration to improve the quality of the fabric and reduce water consumption.
The main motor can be equipped with an optional direct-drive motor. The crankshaft is directly connected to the motor, eliminating the need for an intermediate belt transmission part, reducing losses, and making it more labor-saving and efficient
| Water Jet Loom Configuration Table | |||
Model | HW3851、HW3873、HW600、HW6010、HW6012、HW8010、HW8030 | ||
reed width | Nominal reed width(cm) | 150、170、190、210、230、270、280、290、300、320、340、360 | |
Effective reed | Nominal reed width：0～65cm(≤230cm);0～85cm（＞230cm) | ||
Weft selection | 1color、2 colors、3 colors、4 colors | ||
power | Starting mode | Direct drive motor | super start motor drive |
Motor capacity | 2.2KW、2.7KW、3.0KW、3.7KW、4.5KW、6.0KW | ||
running operation | One-hand operation button | Two-hand operation button | |
Weft insertion | pump | single pump | double pump |
nozzle | Normal nozzle,'U'nozzle | ||
Length measurement and weft storage | （FDP）Electronic Length Measurement (FDP) | （RDP)Mechanical length measurement | |
shedding | Crank shedding: 4-piece type, 6-piece type | 8-piece type | |
Positive cam shedding: 6, 8, 10 piece type | 12,14 piece type | ||
Active dobby: 16 piece type | |||
let off | negative loose warp | Positive loose warp device | |
Left and right double bearing, 2-roll mode | |||
Maximum tension | 500Kg、1000Kg | ||
diameter of the beam flange | ∮800mm | ∮914mm、∮1000mm | |
take up | Roll cloth diameter | maximum is 520MM | |
cloth roll path | S type, L type | ||
Beating-up | Crank multi reed sley beating up mechanism, "U" shaped beating up shaft | Solid straight shaft beating up | |
4 linkage,6 linkage | |||
Weft stand | Floor fixed type 2 barrels/color | ||
Selvage | Mechanical planetary mode | ||
Yarn end treatment | Spindle false twisting method | ||
Weft cutting | Mechanical scissors for weft cutting | ||
dehydration | Suction mode of micro slit tube (electric water suction motor), buoyancy air-water separator | Water absorbing strip | |
electronic | Optical fiber type feeler | Photoelectric type | |
Touch screen, control preparation, start, stop, inching and reverse inching | |||
It can display output, speed, efficiency, shutdown times, etc | |||
The four-color indicator light indicates the reason for stopping | |||
Variable inverter/variable speed device | |||
Automation and labor saving | Automatic water replenishment valve, automatic centralized refueling | Variable frequency speed regulation | |
Strong frame
HW-6010 inherits the advantages of HW-4008 machine, with a design speed of 1200r/min, the wall panel is changed from split to one-piece, the beam is reinforced and designed to lower the center of gravity of the beat-up, the mechanism layout is optimized, and the weft insertion curve is optimized for better adaptability. Weaving from narrow width to wide width, from general fabrics to double-layer and other special specifications fabrics, and facilitates production, processing and installation, and the installation accuracy of the machine is better guaranteed.
Opening stability
It is matched with electronic let-off gear box and electronic take-up gear box to achieve smooth tension operation. By strengthening the strength and smoothness of guide components such as the suction pipe holder, the distance from the beat-up point to the heald frame is shortened, and sufficient weft insertion space is achieved in small openings. It is conducive to the gentle operation of the warp yarns and the quality of the fabric is guaranteed.
Excellent energy saving
For different fabric types, match the appropriate weft insertion configuration and use nozzles with short spacing and high jet water concentration to improve the quality of the fabric and reduce water consumption.
The main motor can be equipped with an optional direct-drive motor. The crankshaft is directly connected to the motor, eliminating the need for an intermediate belt transmission part, reducing losses, and making it more labor-saving and efficient
| Water Jet Loom Configuration Table | |||
Model | HW3851、HW3873、HW600、HW6010、HW6012、HW8010、HW8030 | ||
reed width | Nominal reed width(cm) | 150、170、190、210、230、270、280、290、300、320、340、360 | |
Effective reed | Nominal reed width：0～65cm(≤230cm);0～85cm（＞230cm) | ||
Weft selection | 1color、2 colors、3 colors、4 colors | ||
power | Starting mode | Direct drive motor | super start motor drive |
Motor capacity | 2.2KW、2.7KW、3.0KW、3.7KW、4.5KW、6.0KW | ||
running operation | One-hand operation button | Two-hand operation button | |
Weft insertion | pump | single pump | double pump |
nozzle | Normal nozzle,'U'nozzle | ||
Length measurement and weft storage | （FDP）Electronic Length Measurement (FDP) | （RDP)Mechanical length measurement | |
shedding | Crank shedding: 4-piece type, 6-piece type | 8-piece type | |
Positive cam shedding: 6, 8, 10 piece type | 12,14 piece type | ||
Active dobby: 16 piece type | |||
let off | negative loose warp | Positive loose warp device | |
Left and right double bearing, 2-roll mode | |||
Maximum tension | 500Kg、1000Kg | ||
diameter of the beam flange | ∮800mm | ∮914mm、∮1000mm | |
take up | Roll cloth diameter | maximum is 520MM | |
cloth roll path | S type, L type | ||
Beating-up | Crank multi reed sley beating up mechanism, "U" shaped beating up shaft | Solid straight shaft beating up | |
4 linkage,6 linkage | |||
Weft stand | Floor fixed type 2 barrels/color | ||
Selvage | Mechanical planetary mode | ||
Yarn end treatment | Spindle false twisting method | ||
Weft cutting | Mechanical scissors for weft cutting | ||
dehydration | Suction mode of micro slit tube (electric water suction motor), buoyancy air-water separator | Water absorbing strip | |
electronic | Optical fiber type feeler | Photoelectric type | |
Touch screen, control preparation, start, stop, inching and reverse inching | |||
It can display output, speed, efficiency, shutdown times, etc | |||
The four-color indicator light indicates the reason for stopping | |||
Variable inverter/variable speed device | |||
Automation and labor saving | Automatic water replenishment valve, automatic centralized refueling | Variable frequency speed regulation | |
